- 07 5580 4465
The SeaPen by DOCKPRO
Dry-Dock at Water Level. Launch with One Click.
Australia’s most advanced boat storage system – the SeaPen keeps your vessel dry, clean, and ready to go. No antifoul. No lifting. No hassle. Just better boating.
4,000+
SeaPens sold globally
15+
years of life per SeaPen
20+
years in the market
- Made in Australia
- 134 Customer Reviews
- 6–20 Metre Vessels
- No Antifoul Required
- Remote Operation
- Finance Available
How the SeaPen Works
As Easy as Parking Your Car in the Garage
The SeaPen is a water-level dry dock – your vessel sits in a purpose-built cradle that keeps it completely out of the water between uses. No crane. No trailer. Just push a button.
01
Open the Gate
Press ‘Down’ on your remote to open the SeaPen’s rear gate and motor in at a gentle idle.
02
The SeaPen Catches You
The frame guides your vessel into position – it acts as a catcher, making solo docking effortless.
03
Close and Drain
Press ‘Up’ to close the gate. The automatic bilge pump drains the water and keeps your hull bone dry.
04
Hull Stays Dry
Patented rope mat technology creates an air gap around your hull, allowing complete drainage and ventilation.
Why the SeaPen
Everything a Dry Dock Should Be
The SeaPen delivers all the benefits of traditional dry docking without the complexity, cost, or footprint of a conventional boat lift.
No More Antifoul
Dry-docking eliminates marine growth without toxic, expensive antifoul. Save thousands per year and stop the time-consuming strip-and-repaint cycle.
Better Performance
A clean, dry hull can add 3–5 knots to your vessel's speed and significantly reduce fuel consumption compared to an antifouled hull.
More Time on the Water
Boat owners with dry storage use their vessel 32 times a year vs 11 times for trailer owners. The SeaPen removes every barrier to getting out on the water.
Higher Resale Value
Vessels stored in SeaPens sell for 6–8% more than comparable wet-stored boats. Buyers often purchase the vessel and SeaPen together.
Solo Docking Made Simple
The SeaPen's guided frame means you can dock without crew, without fenders, and without the stress. Perfect for solo outings.
Full Perimeter Access
Walk around your entire vessel on the SeaPen's HDPE frame. Wash down, fit covers, and perform maintenance from every angle with ease.
The SeaPen Pays for Itself
Wet Slip Storage
- Antifouling – every 12–18 months
- Lift-out and relaunch fees
- Hull cleaning and stripping
- Accelerated salt damage
- Lower resale value
Recommended
SeaPen Dry Dock
- No antifoul required
- No lift-out fees
- Annual service only
- Dry hull, clean running gear
- Asset you can resell
Specifications
Built to Last. Built in Australia.
All SeaPens are manufactured at our state-of-the-art facility on the Gold Coast. HDPE construction means the frame is UV-stable, salt-resistant, and built for the Australian marine environment.
Specifications Table
| Maximum Vessel Length | ~20 metres |
|---|---|
| Vessel types supported | Monohulls, catamarans, pontoons, wake and ski boats, trailer-sailors |
| Drive types | Outboard, stern drive, jet drive, V-drive |
| Minimum Water Depth | 50cm + vessel draft |
| Maximum Wave Height | 30 centimetres |
| Maximum Water Fluctuation | Unlimited |
| Frame Material | HDPE (High-density polyethylene) |
| Remote Control Operation | Yes |
| Power Options | AC |
| Floating Pontoon-Compatible | Yes |
| Fixed Jetty-Compatible | Yes |
Parts & Accessories
T-Top Dock Cover System
Aluminium Walkway
Armour Mesh
Annual Servicing Available
Like your car or boat, your SeaPen benefits from an annual preventive service to keep it performing at its best and preserve your warranty.
“The SeaPen has been my saviour, from a boating relationship perspective as well as from the sheer ease of leaving the pontoon and returning to the pontoon in a very safe manner. I am no longer required to manage ropes or fenders. I can now step onto the boat and prepare some refreshments which make for a wonderful and relaxed start to our boating experience. I love the Riv but I love the SeaPen more!”
Kay McCue
Riviera M370 Owner, Queensland
Common Questions
SeaPen FAQs
Is the SeaPen really dry?
Yes. When you close the SeaPen’s rear gate, the automatic bilge pump detects and removes any trapped water. The patented rope mat creates an air gap between your hull and the SeaPen skin, allowing full ventilation and drainage. Your hull will be completely dry.
Which vessels can the SeaPen support?
The SeaPen suits almost all recreational and light commercial vessels from 6 to 20 metres with outboards, stern drives, jet drives, and V-drives – including monohulls, catamarans, tri-hulls, pontoon boats, wake and ski boats, and trailer-sailors.
What happens in heavy rain or a storm surge?
The bilge pump activates every 2 hours to sense for water, pumps out anything it detects, and returns to standby. Heavy rain, wake, storm surges – your SeaPen handles them automatically.
How long does a SeaPen last?
The SeaPen doesn’t have a fixed lifespan. Its HDPE frame and skin are built for durability and, with regular annual servicing, many units have been in service for over 15 years. Individual components can be replaced as needed.
Can I walk on my SeaPen?
Yes. The high-density polyethylene frame supports your full body weight, giving you access to all sides of your vessel. For more stable footing, add an optional anti-slip aluminium walkway to the frame.
Can my SeaPen be insured?
Yes. Most insurers can include your SeaPen in your vessel’s existing insurance policy. Your DOCKPRO consultant can advise further when you enquire.
Ready to Make the Switch?
Get Your SeaPen Quote Today
Talk to a DOCKPRO consultant about the right SeaPen configuration for your vessel and berth. We’ll walk you through specifications, pricing, installation, and finance options.
"*" indicates required fields
Or call us on 07 5580 4465 · Australian-made · Gold Coast, QLD
Manufacturer and distributor of the SeaPen water-level dry dock system. Gold Coast, Queensland, Australia.
- Copyright © 2026 DockPro
- Website by iOnline